4-Pack 315MHz TPMS Sensor Compatible with Buick, Cadillac, Chevrolet, and GMC

A TPMS Scan Tool is required to relearn the Tire Pressure Monitoring System (TPMS) for vehicles such as the Chevy Silverado, Ford F150, and GMC Sierra Series. This is a Stationary Relearn process, which means you need a TPMS scan tool to make the vehicle recognize the sensors. Without this step, the vehicle will think the sensor is missing, and the TPMS telltale light will remain illuminated.

The SEINECA Tire Pressure Sensors feature an advanced chip technology that ensures the signal is only transmitted when the wheels are rotating, extending the sensors' service life. Additionally, the battery is made to last up to 5-10 years of normal use, operating in temperatures ranging from -86°F to 158°F.

The same manufacturing process as the Original Equipment (OE) ensures the reliability and safety of the SEINECA Tire Pressure Monitoring System Sensors. Each sensor has been 100% tested to guarantee trouble-free installation and performance.

For Chevrolet Tahoe models from 2008-2012 (not equipped with a Keyless Entry or Driver's Information Center), the TPMS Relearn Instruction is as follows:

1. Inflate all tires to the pressure listed on the placard.
2. Turn the ignition to the ON/RUN position with the engine OFF (not the ACC position) and lower the driver's side window.
3. Press the trip odometer button until "LEARN TIRE PRESSURES" is displayed, then hold down the button until the horn chirps.
4. Starting with the LF tire, use a properly formatted TPMS scan tool to scan each sensor in the following order: LF, RF, RR, and LR. The horn will chirp after the vehicle has received a signal from each sensor.
5. After activating the LR tire, the horn will chirp twice, indicating the relearn is complete.
6. Turn the ignition to the OFF position.

To ensure compatibility, check the provided list to confirm your vehicle model and year are supported. The 13598771 tire sensor is 315MHz, so it will not work with 433MHz vehicles.

The Tire Pressure Monitoring Sensors are pre-programmed, but a TPMS diagnostic tool is required due to the Stationary Relearn Procedure used by most GM vehicles.

If the TPMS sensor you received is not functioning, there are a few steps to troubleshoot: 1. If the sensor was damaged during shipping, contact Amazon customer service for a free replacement. 2. If the sensor is undamaged but cannot work, check the compatibility list and frequency of your vehicle. If your vehicle is not listed or the frequency is not 315MHz, you likely purchased the wrong sensor. 3. If your vehicle is compatible and the frequency is 315MHz, but the sensor still does not work, please provide your vehicle information (make, model, year, or VIN) to our team, and we will assist you.

The SEINECA Tire Pressure Sensors come with a 60-day return policy and a 24-month warranty. To replace the sensor, follow these steps: 1. Lift your car, remove the tire, and strip away the tire to allow the air to escape. 2. Remove the old TPMS sensor and insert the new sensor through the rim hole. 3. Inflate the tire and check the balance before reinstalling the wheel.

product information: